Serial production of cylinders with a capacity of up to 210 liters and a pressure of up to 39.2 MPa is organized at a special production base equipped with original equipment of domestic and imported production
The company's technological process and testing facilities are organized in a closed cycle and allow us to produce high-quality products with a high degree of reliability. The cylinders are capable of withstanding pressure 3-3.5 times higher than the working pressure and more than 15 thousand cyclic loads without destruction.
Manufacturing
Production stages
Each batch of cylinders is protected by random tests
1
Incoming inspection of aluminum pipe
01---- 15
2
Резка трубы на заготовки
Production stages
Each batch of cylinders is protected by random tests
2
Cutting pipes into blanks
02---- 15
2
Зачистка внутренней части и мойка заготовки
Production stages
Each batch of cylinders is protected by random tests
3
Cleaning the interior and washing the workpiece
03---- 15
4
Вальцовка трубной заготовки
Production stages
Each batch of cylinders is protected by random tests
4
Rolling of pipe blanks
04---- 15
5
Закатка днищ лейнера
Production stages
Each batch of cylinders is protected by random tests
5
Rolling up the bottoms of the liner
05---- 15
5
Контроль размеров и внутренней поверхности лейнера
Production stages
Each batch of cylinders is protected by random tests
6
Control of dimensions and inner surface of the liner